There are plenty of different ute tub covers to choose from. The best ute tub cover depends on how you use your ute, what you carry, and whether you need simple coverage or a setup that can handle tools, gear, touring and roof-mounted loads.
The main types are vinyl tonneau covers, roller shutters, plastic and ABS lids, fibreglass lids and aluminium hard lids.
Every manufacturer will tell you their product is the best. But what really matters is what's best for how you use your ute. Below, we compare the pros, cons and price of each type, then give our recommendation.
Keep reading: What to Consider | Vinyl Tonneau | Roller Shutters | Plastic / ABS | Fibreglass | Aluminium | GearForce | Load-Lid | Our Recommendation | FAQs
What to Consider Before Choosing a Ute Tub Cover
The cheapest ute tub cover isn't always the best value if you end up replacing it when it fails you, or once your work, weekend or touring needs grow. Before deciding on one specific type of cover, consider the following factors:
| Factor | Why it matters |
|---|---|
| Security | Can it be cut, pried or forced open? Does it lock? |
| Water and dust resistance | Critical on gravel roads, farms and off-road tracks |
| Load rating | Can you carry gear on top, or only underneath? |
| Roof rack / rooftop tent compatibility | Only load-rated lids with suitable rails can carry a tent |
| Tub space lost to mechanisms | Roller shutters can consume 10-20% of tub length |
| Long-term durability | Will it hold up in NZ and Australian conditions over years of use? |
The question most buyers don't ask: will you outgrow it? A ute owner who starts out commuting, often ends up camping, then adds bikes, then wants a rooftop tent. Each step up exposes the limits of a basic cover. If your use is likely to grow, choose a cover that grows with you.
1. Vinyl Tonneau Tub Cover
Vinyl Tonneau Covers are called many different names but are essentially a sheet of vinyl secured to the tub by elastic straps or aluminium extrusion clips. They're very popular in rural farming applications due to their low cost and flexibility.
What they offer
- Lowest price point of any tub cover option
- Ultimate flexibility: within seconds, you're back to a bare tub
Where they fall short
- Can be cut open in seconds if you carry anything of value
- Poor water resistance
- UV exposure and regular use degrade them quickly
- Require permanent fixings to the tub, often on the exterior
- Can flap while driving
Price
Vinyl tonneau covers are very simple in construction and cost very little to produce. They start from around $450, and premium versions cost up to around $1,100.
Applications
Given that they have zero security, a tonneau cover works best in rural areas where the flexibility can be put to use. If you take one into the city, expect whatever is in the back to be stolen.
2. Roller Shutters and Roller Tub Covers
A roller ute tub cover is a retractable cover made up of a series of interlocked slats that retract at the cab end of your tub, giving you access to the full tub. They're a popular factory accessory on several models.
What they offer
- Fully retractable, so you get full tub access when it's rolled away
- Oversized objects like a motorbike or fridge can be transported standing upright with the cover retracted
- Very low profile and minimalist design
- Good flexibility for day-to-day use
- Cost-effective because they aren't load-bearing
Where they fall short
- Dust gets into slat mechanisms and tracks, causing jamming on gravel roads or farm tracks
- Leaking is a known issue depending on design and installation quality
- Difficult to install, and can't be removed and re-fitted easily
- Some models are easy to force open
- The rolled-up canister uses up approximately 10-20% of your tub depending on the model
Price
Roller covers vary in price depending on quality, whether they're manual or electric, and where they're made. A basic manual roller cover starts from around $1,400, and premium electric covers can cost over $5,000. Installation is often extra.
Applications
The roller cover suits light recreation and work usage due to its convenience and flexibility. If dust is one of your main concerns, read our guide on how to make your ute tub dust-proof.
Already have a roller shutter? The GearForce Tub Platform adds what it's missing
If you've already got a roller shutter cover and aren't ready to replace it, the GearForce Tub Platform is worth knowing about. It's an aluminium platform that mounts above the roller shutter, giving you a proper load surface on top without removing the cover underneath.
It won't fix dust ingress or the canister space issue, but it does solve the load-carrying problem. If you're a Ford Ranger Wildtrak or Raptor owner who wants to keep the roller shutter and still carry bikes, a ladder or gear on top, this is the practical middle ground.
3. Plastic and ABS Lids
Plastic hard lids are vacuum-formed ABS, painted to match the vehicle and hinged at the cab end. Their smooth exterior finish is painted in gloss automotive paint to match your vehicle's colour.
What they offer
- Smooth and refined exterior finish that matches your vehicle colour
- Can be moulded in almost any shape, so spoilers and distinct body lines are sometimes used
- Better security and water protection than a roller cover
- Low-cost way of securing your tub
Where they fall short
- Low load rating, so no rooftop tents, bikes, ladders or recovery gear on top
- Paint scratches and chips with regular use and can't be repaired cleanly
- Heat expansion in NZ and Australian conditions can stress the plastic and affect the seal
- If the lid cracks, replacement is usually the only option
- Storage is restricted to under the lid, and seen as impractical by many tradies
Price
Plastic hard lids are generally only available in a 1-piece and 3-piece version, with no accessories to influence the price. They start from around $1,300, and painted, colour-matched lids cost around $2,600 or more.
Applications
A plastic hard lid suits a ute used as a daily driver: going to the shops, a company vehicle for office staff, or taking the kids to the footy on the weekend.
4. Fibreglass Lid
A fibreglass lid and a plastic lid look and function almost exactly the same. The main difference is the material properties.
What they offer
- Can typically be repaired if cracked or broken
- Stronger and more rigid than plastic
Where they fall short
- Heavier than plastic
- Not designed to carry loads on top, so rooftop tents, bikes and recovery gear aren't practical
- Can crack under hard use in off-road or worksite environments
- Nearly impossible to recycle, and contains toxic and harmful chemicals
Price
Similar to plastic.
Applications
Similar to plastic.
5. Aluminium Hard Lids
An aluminium lid is a hard lid made from aluminium sheet instead of plastic or fibreglass, and is becoming increasingly popular due to its ability to carry a load on top of the lid as well as underneath, fully utilising your ute's capacity.
What they offer
- Stronger security than most soft or painted covers
- Better long-term durability
- Ability to carry gear on top, depending on load rating
- More suitable for bikes, ladders, camping gear and recovery tracks
- Better suited to tradies, touring and serious recreational use
- Aluminium construction that suits NZ and Australian conditions
- More practical accessory options than basic covers
Where they fall short
- Higher upfront cost
- Less suited to buyers driven only by price
- Front tub access can be more limited than with a roller shutter
- Cannot usually be driven fully open like an uncovered tub
Price
Aluminium tub lids vary a lot, mostly driven by spec and quality. A basic aluminium cover starts from around $1,500, and a highly spec'd setup can cost $6,000 or more. The GearForce Hard Lid is $3,500 + GST, and the Utemaster Load-Lid starts from $4,576 + GST.
Applications
Due to the durability and customisation potential, an aluminium hard lid suits heavy trade or recreational use where the product's value is put to work. If your ute is never at the centre of the action, an aluminium lid may not be the right fit.
Not all aluminium hard lids are equal. Load ratings, sealing quality, locking systems and accessory compatibility vary significantly between brands. It's worth looking beyond the price tag.
GearForce Hard Lid
The GearForce Hard Lid is built for ute owners who want a stronger, more practical option than a basic lid or roller cover without stepping into a full premium build. It's the value-without-compromise option in the aluminium hard lid category, and is backed by a 3-year warranty.
- Price: $3,500 + GST
- Load rating: 200kg dynamic / 400kg static
- Side rails as standard, with cross bars available ($298 + GST a pair)
- Central locking through the tailgate and full perimeter weather seals
- Quick-release system for full tub access
- 3-year warranty
Utemaster Load-Lid
The Utemaster Load-Lid is the premium aluminium hard lid for ute owners who use their ute in varying ways, starting from $4,576 + GST. It now comes with Destroyer side rails as standard and is backed by a 5-year warranty. It's designed for tradies, tourers, campers, 4WD users and anyone carrying valuable gear, bikes, recovery equipment or roof-mounted loads.
The Load-Lid also offers a full accessory ecosystem, making it a top option for those who change their setups over time.
See our guides on the best hard lid for 4WD and camping, mounting a rooftop tent on a ute hard lid, and mounting recovery tracks to a hard lid.
Final Recommendation
There's no single best ute tub cover for every buyer. But there's usually a clear best option for how a specific ute is used.
- If you only need basic coverage and security isn't a priority, entry-level covers may be enough for now.
- If you want a smarter step up, GearForce is the value-without-compromise option. Aluminium construction, a 200kg dynamic / 400kg static load rating, proper sealing and central locking for $3,500 + GST.
- If you carry tools, bikes, recovery gear, camping kit or roof-mounted loads, the Load-Lid is the stronger long-term choice. From $4,576 + GST with Destroyer side rails, a broader accessory range, a 5-year warranty and proven weatherproofing.
- If you need more enclosed storage than any tub cover can offer, the Centurion Canopy may be the next step.
Most buyers start with a basic cover, outgrow it, and then buy the lid they should've bought first. If you can see where you're heading, plan for it now and skip that step.
Browse our full range of hard lids or use the vehicle selector to see what fits your make and model.
Frequently Asked Questions
What's the best ute tub cover?
It depends on how you use your ute. For basic coverage on sealed roads, a roller cover or plastic lid can do the job. If you need security, weather sealing and the ability to carry gear on top, an aluminium hard lid is the strongest option. For most recreational use, we recommend the GearForce Hard Lid. For tradies, touring and roof-mounted loads, we recommend the Utemaster Load-Lid.
How much does a ute tub cover cost?
Vinyl tonneau covers start from around $450, roller covers from around $1,400, plastic and ABS lids from around $1,300, and aluminium hard lids from around $1,500. Premium electric roller covers and fully spec'd aluminium lids can cost $5,000 or more. The GearForce Hard Lid is $3,500 + GST, and the Utemaster Load-Lid starts from $4,576 + GST with Destroyer side rails.
Which ute tub cover is the most secure?
A lockable aluminium hard lid with no exposed latches is the most secure option. Vinyl tonneau covers can be cut open in seconds, and many roller covers can be forced open with basic tools. The GearForce Hard Lid locks through the tailgate, so there are no exposed latches to tamper with.
How do I keep gear dry and dust-free in a ute tub?
Choose a cover with full perimeter seals and a front seal at the cab end. Roller covers and vinyl covers have more gaps where water and dust can get in. For more tips, read our guide on how to make your ute tub dust-proof.
Can I put a rooftop tent or cross bars on a ute tub cover?
Only on a load-rated hard lid with rails. Vinyl, roller, plastic and fibreglass covers aren't designed to carry loads on top. The GearForce Hard Lid has a 200kg dynamic / 400kg static load rating and side rails as standard. The Load-Lid comes with Destroyer side rails and a full accessory range for rooftop tents, bikes and recovery gear. See our guide to mounting a rooftop tent on a ute.
Should I get a hard lid or a canopy?
A hard lid keeps your tub flexible and suits most recreational and light trade use. A canopy gives you more enclosed, weatherproof storage space. If you need more space than a tub cover can give you, look at the Centurion Canopy.