What Ford Ranger accessories does Utemaster make?

Utemaster makes a full range of Ford Ranger accessories including the Load-Lid, Centurion Tub Canopy, Trays and more. Every product is aluminium-built and engineered to fit the Ford Ranger dimensions precisely.

Which Ford Ranger models are compatible?

Utemaster accessories are available for the Ford Ranger PX (2011-2022), Next Gen Ranger (2022+), and Next Gen PHEV (2025+). Each product listing confirms exact model trim, year and cab compatibility before you order.

What's the difference between a Ford Ranger tub canopy and a full-time chassis canopy?

The Centurion Tub Canopy mounts onto your Ranger's existing tub and can be removed when you need the open tray back. A full-time chassis canopy replaces the tub entirely and mounts permanently to the chassis - giving more internal height, more storage volume, and a purpose-built tradie or expedition platform. For information check out the product pages listed above for more information.

Can I fit a roof top tent to my Ford Ranger canopy or hard lid?

Yes. With the Utemaster Cantilever Roof Rack fitted to the Ford Ranger Centurion Canopy, you get a 600kg static load rating - well above the weight of any roof top tent on the market. The Load-Lid also supports roof top tent mounting with the correct fitting kit. See the full roof top tent mounting guide.

Where can I get my Ford Ranger accessories fitted?

You've got three options. If you're buying a new Ranger, the easiest path is through your dealership - we work directly with Ford dealers to add your Utemaster fit-out onto your vehicle finance package and have it fitted before you take delivery.If you're fitting to an existing vehicle, we'll match you with an accredited Utemaster installer near you. Installers are trained and certified by Utemaster, and your 5-year warranty is fully protected either way.Or fit it yourself - both the Load-Lid and Centurion Canopy require no drilling, no cutting, and use your Ranger's existing tub mount points. Every bolt and bracket is in the box, with step-by-step video instructions for your exact model. If you can change a tyre, you can do this.More info can be found here.

Do Utemaster canopies fit all Ford Ranger variants, including the Raptor, Tremor, and Super Duty?

Yes. All Next-Gen Ford Ranger variants share the same tub top edge and interior mounting points, which is what determines canopy fitment. The XLT, Sport, Wildtrak, Raptor, Tremor, and Super Duty all take the same Centurion Canopy. What changes between variants is the exterior flares and wheel track, not the tub itself. Published vehicle dimensions reflect the widest point of the vehicle (usually the flares), which can cause confusion online. The Tremor, for example, sits 30mm wider in wheel track due to different wheels and tyres, but this has no bearing on canopy fit. The only thing to check before fitting is whether your Ranger came with any factory-fitted tub accessories such as a sports bar, sail plane, or roller cover. These will need to be removed first so the tub is back to its base state.

Ford Ranger Accessories & Aftermarket Parts

Ute accessories built for any mission - purpose-built to suit the Ford Ranger.

When you're halfway through a big job or hours from the nearest town, you'll find out fast if your setup was actually built for it. Backed by 20+ years of experience, trusted by 50,000+ operators, and built on Strong Bones.

Every product starts with aluminium - stronger, lighter, and built to handle real work and real adventure without cracking, fading, or failing under load. Backed by a 5-year warranty - if it's not right, we'll make it right, no questions asked.

POPULAR SETUPS

Accessorise your setup

1x Cable Holder
Extension leads left loose in a canopy end up tangled, buried, or both. The Cable Holder...
$43+GST
1x Shelf Back
The Canopy Shelf Back turns the Removable Canopy Shelf into a proper worksite storage system. Without...
$334+GST
2x Load Stop
Ratchet straps work, but they take time to set up, they slip if you don't tension...
$207+GST
3x Outrigger Extension
The MK4 Cantilever Roof Rack is already one of the most capable racks available - but...
$263+GST
Awning Mount Bracket
Fitting an awning to your canopy can be awkward and time-consuming. That means more time messing...
$289+GST
Canopy Roof T-Tracks
If you're wanting to mount a roof platform to your canopy, the Canopy Roof T-Tracks make...
$355+GST
Canopy Vent
Ute tubs have gaps in the tailgate by design - they're there to let water drain...
$300+GST
Conduit Carrier
PVC conduit tubes flex, sag, and struggle under pressure - especially over longer lengths. That's not...
$656+GST
Cross Bars (Pack of 3)
The 1300mm Cross Bars expand the usable load area on your Cantilever Roof Rack, giving you...
$468+GST
Dog Vent Kit
The Centurion Canopy is built without windows - that's a deliberate security decision. But if you're...
$368+GST
Front Wall Mounting Panel
The front wall of your canopy is prime real estate for mounting equipment. Batteries, inverters, switches,...
$497+GST
Heavy Duty Tub Mat
The Heavy Duty Tub Mat stops gear sliding around in your tub, with a 7mm thick...
$353+GST
Ladder Hooks
The Ladder Hooks give your small step ladder a secure, dedicated spot inside the canopy instead...
$104+GST
Lighting Upgrade (x2 Extra LEDs)
The MK4 Centurion Canopy comes standard with one LED light mounted inside the rear door as...
$350+GST
MK4 Cantilever Roof Rack
Most roof racks are bolted between the cab and the canopy. That's a problem - when...
$2097+GST
Mule-Fix Clamp Set
Nobody likes chasing a spade, axe or fishing rod sliding around in the back. It wastes...
$118+GST
Ratchet Tie Down Straps
The Cantilever Rack is a seriously robust optional extra for the Aluminium Canopy with a 200kg...
$203+GST
Rear Roller Bar
Loading the MK4 Cantilever Rack is a lot easier with a roller at the rear -...
$499+GST
Rear View Camera
If you're used to seeing out your back window, switching to a metal canopy takes some...
$541+GST
Roof Platform
The Roof Platform is an optional add-on for the Centurion Canopy that sits over the rear...
$1214+GST

15kg Gas Stay Upgrade
The Load-Lid comes standard with gas stays sized for opening with no load on top. If...
$200+GST
Additional LED Floodlight
Add an extra spotlight to your Premium Lighting Kit.
$158+GST
Destroyer Side Rails
The Destroyer Side Rail is built to carry. Constructed from a hybrid of pressed aluminium and...
$710+GST
Heavy Duty Tub Mat
The Heavy Duty Tub Mat stops gear sliding around in your tub, with a 7mm thick...
$353+GST
Lashing Rings
The Load-Lid is rated to carry a load on top - the Lashing Rings give you...
$234+GST
Lid Spacer Kit
The Load-Lid is designed to close flush and keep your gear secure - the Lid Spacer...
$147+GST
Load Stop
Loading onto a hard lid is easy - until your gear slides straight into the rear...
$466+GST
Mule-Fix Clamp Set
Nobody likes chasing a spade, axe or fishing rod sliding around in the back. It wastes...
$118+GST
Mule-Tek Tub Panel
Those inner tub walls above the wheel arches? Most setups just ignore them. Mule-Tek doesn't. MULE-TEK...
$417+GST
Rear Ladder Rack
The Rear Ladder Rack gives you a rear support point for carrying long loads on the...
$1087+GST
T-Track
The Load-Lid T-Track unlocks the full width of your hard lid for mounting crossbars, bike carriers,...
$373+GST

2x Rear Step
The Rear Step is an optional add-on for the TrailCore Service Body that folds out from...
Cantilever Roof Rack to suit TrailCore
Every ute flexes between the cab and the tray while driving. Most roof racks mount to...
Fold Down Ladder
Reaching gear on the roof can be challenging due to the vehicle's height. The Fold-Down Ladder,...
Mule-Tek to suit TrailCore
For years, you've shared the same challenge: struggling to access the right gear when you need...
Rear Roller to suit TrailCore Cantilever Rack
The Cantilever Rear Roller is an optional add-on for the Utemaster Cantilever Roof Rack that makes...
Roadside Safety Door
The Roadside Safety Door is an optional upgrade for the TrailCore Full Time Canopy that gives...
Roof Platform to suit TrailCore
The Roof Platform is an optional add-on for the TrailCore Canopy that sits over the rear...
Service Body Shelving & Drawers
Most ute bodies have a flat floor - and the further in you go, the harder...
Split Door Work Bench
The Split Door is an optional add-on for the TrailCore Full-Time Canopy that turns your door...
Toolbox Shelving & Drawers
When you're mid-job and need a 17mm spanner, you don't want to be digging through a...
Tray Canopy Shelving & Drawers
When you're fitting out a canopy, it's hard to know exactly how your ute will be...
Underbody Drawer
Most underbody drawers bolt on underneath, adding height and making an already tall ute even harder...
Underbody Drawer Add Ons
Get more out of your centre drawer. The TrailCore's under-tray centre drawer is generously sized, and...
Underbody Hand Wash Tank
The Underbody Hand Wash Tank is an optional add-on for the TrailCore Service Body that gives...
Underbody Toolbox
The Underbody Toolbox is an optional add-on for the TrailCore Full Time Canopy that makes use...

FORD RANGER Gallery

INSPIRATIONAL Ranger BUILDS

Check out some of the cool things our customers are doing with their Ford Rangers...

Arden Packeer's Ultimate Overlanding Rig

By trade, Arden Packeer is a software developer. But outside of work hours, he's all about family adventures, overland travel, and getting off-grid in his fully kitted Ford Ranger. Tech-savvy...

Next Gen Ford Ranger Touring Setup

This Next Gen Ford Ranger was built for serious touring. Kitted out with a Utemaster Centurion Canopy, a full drawer system, and a purpose-built camp setup, it's a clean example of what a well-specced...

JE Wilds

JE Wilds' Ford Ranger Raptor hunting and fishing build showcases a purpose-built Utemaster canopy designed for fishing trips, off-road adventure and family excursions. With a worldwide fanbase that follows along...

Frequently Asked Questions

: Utemaster makes a full range of Ford Ranger accessories including the Load-Lid, Centurion Tub Canopy, Trays and more. Every product is aluminium-built and engineered to fit the Ford Ranger dimensions precisely.
: Utemaster accessories are available for the Ford Ranger PX (2011-2022), Next Gen Ranger (2022+), and Next Gen PHEV (2025+). Each product listing confirms exact model trim, year and cab compatibility before you order.
: The Centurion Tub Canopy mounts onto your Ranger's existing tub and can be removed when you need the open tray back. A full-time chassis canopy replaces the tub entirely and mounts permanently to the chassis - giving more internal height, more storage volume, and a purpose-built tradie or expedition platform. For information check out the product pages listed above for more information.
: Yes. With the Utemaster Cantilever Roof Rack fitted to the Ford Ranger Centurion Canopy, you get a 600kg static load rating - well above the weight of any roof top tent on the market. The Load-Lid also supports roof top tent mounting with the correct fitting kit. See the full roof top tent mounting guide.
: You've got three options. If you're buying a new Ranger, the easiest path is through your dealership - we work directly with Ford dealers to add your Utemaster fit-out onto your vehicle finance package and have it fitted before you take delivery.
If you're fitting to an existing vehicle, we'll match you with an accredited Utemaster installer near you. Installers are trained and certified by Utemaster, and your 5-year warranty is fully protected either way.
Or fit it yourself - both the Load-Lid and Centurion Canopy require no drilling, no cutting, and use your Ranger's existing tub mount points. Every bolt and bracket is in the box, with step-by-step video instructions for your exact model. If you can change a tyre, you can do this.
More info can be found here.
: Yes. All Next-Gen Ford Ranger variants share the same tub top edge and interior mounting points, which is what determines canopy fitment. The XLT, Sport, Wildtrak, Raptor, Tremor, and Super Duty all take the same Centurion Canopy.
What changes between variants is the exterior flares and wheel track, not the tub itself. Published vehicle dimensions reflect the widest point of the vehicle (usually the flares), which can cause confusion online. The Tremor, for example, sits 30mm wider in wheel track due to different wheels and tyres, but this has no bearing on canopy fit.
The only thing to check before fitting is whether your Ranger came with any factory-fitted tub accessories such as a sports bar, sail plane, or roller cover. These will need to be removed first so the tub is back to its base state.

Fishing with the Utemaster TrailCore Tray Canopy Ute Accessories

GET YOUR RANGER MISSION READY.

Join 50,000+ operators who sorted their setup and didn't look back.

Build Your Ute See real setups

Or browse the full range

Your cart is empty

Ford Ranger Accessories & Aftermarket Parts

POPULAR SETUPS

Accessorise your setup

Tub Canopy Accessories

Tub Hard Lid Accessories

TrailCore Accessories

FORD RANGER Gallery