Use the dropdowns below to select your vehicle.
You will then be able to see what's available for your vehicle model once you have.
Hit enter to search or ESC to close
Your cart summary
Busy tradesman, mobile workforces and adventurous ute owners need tough gear that works for work during the week and recreation during the weekend.
Do you struggle with: load capacity, access to gear, adjustability of layout, stolen equipment, lack of storage, water damage and gear not lasting the distance?
The TrailCore is the most spacious, practical and modern Service Body ever so you can so you can get stuff done, enjoy life’s adventures.
Check out this video to see it in action:
WATCH NOW
Utemaster has been making Service Bodies for over 15 years for almost every application including building sites, offroading, construction, camping, mining and much more!
The TrailCore is the latest Service Body from Utemaster and combines market-leading technology with this background of experience.
WATCH NOW
The TrailCore 4-in-1 flooring system is a ground-breaking advancement in the design of a Service Body. Rather than a box built on a flat floor, the TrailCore follows the shape of the chassis in the middle and is raised on the sides to allow for wheel travel.
But what was wrong with the traditional style everyone uses where the floor is flat? Why did we come up with such a bold innovation?
- Ergonomics. Ute's are getting taller and taller, and having the drop-down floor design the centre section makes it easier to lift loads in and out.
- Maximising Space. There is no dead space either under the floor or inside the body with the 4-in-1 system.
- Reducing the overall height. When an underbody drawer is added to a traditional Service Body it is either very slim or the whole body gets lifted higher. Because the 'underbody' drawer is now inside, it does not change the height of your body.
- Weather Protection. Because the drawer system is now inside the body, there is no risk of water or dust ingress.
Why is it called the 4-in-1 system? Without changing the structure of the body, we give you 4 completely unique base configurations depending on what you need. Check out the four options below:
This creates a very flexible easy load height/storage area and is perfect for people who have varying roles. It allows for tall objects to be carried in the centre section, while tool cases and smaller parts can be carried in shelving units.
Design Registration: 431190, 431558
This is perfect for storing large objects out of the way such as ladders without compromising the main service body storage area and having to mount the ladder to the roof. This area is accessible via a separate tailgate.
This works like a sliding platform which is perfect for storing large heavy objects up the front in between the shelving and easily getting them in and out of the body. It's also super practical for mounting an extra set of shelving which can be slid out the back for access on demand.
Design Registration: 431557
This is the equivalent of a traditional Service Body with an Underbody Drawer. You get a flat floor and a closed drawer under the floor. The key differences are that the body doesn't get lifted to fit a drawer underneath and the underfloor drawer is now much longer.
Reaching gear that's positioned down the centre of a Service Body is difficult. Especially if your Ute has been lifted - The higher Utes get, the higher the floor level gets.
This makes it harder to work out of and not only can this be unproductive, but it also increases the chance of strain injury on the job.
The TrailCore Service Body features a unique drop-down floor in the centre of the Body. This can be used as a full-length drawer so you can slide gear out from the centre section and access it from the back. The space can either include a shelving unit or be left open for loading large objects. The lower floor height makes it easier to lift heavy items and slide them to the front of the body.
This way you can utilise every part of the TrailCore Service Body and have a seamless workflow on the job site.
We've maximised the door openings on the TrailCore Service Body so you can get instant access to your gear.
The door sills are shaped to enable equipment to slide in and out without needing to lift up and over the door frame making it quicker to get what you need out of the body.
The TrailCore Service Body also features a full shape rear door which goes all the way out to the edge of the body. This greatly increases the accessibility from the rear, especially when reaching shelving in the centre of the body.
Design Registration: 431575
Enter the most practical Service Body on the market - it's so well designed you won't feel like you're driving a work hack. Is your Ute more than a work ute? The TrailCore will fit in perfectly at the job site, in the bush, on the motorway, at the beach and on a construction site!
The TrailCore Service Body looks as good as it performs, and it deserves a double take. It's been designed to match the shape of the body and better still, there are no exposed rivets on the outside surface which makes it a breeze to sign write, not to mention the sleek look.
Design Registration: 431188, 431189
Often a Service Body or tray and canopy combo will not come standard with infill panels, leaving areas of the underbody exposed.
This leaves the vehicle looking unfinished and out of shape.
The Utemaster TrailCore Service Body comes standard with infill panels to suit the contours of the ute it's going on. These are all model-specific and will cover up any exposed areas under the body, enhancing the overall style.
Most modern utes come standard with rear radar systems which provide driver assist technology such as blind spot warning, cross-traffic alerts and reverse braking.
These radars need to be transferred from the tub to the tray or body that you are fitting and often get tacked on underneath which makes them vulnerable to damage offroad.
The TrailCores rear bumper has inbuilt capability to house the rear radar system, so they are not protruding from the body and are protected from damage offroad
The TrailCore Service Body is built using Heavy Duty Aluminium extrusions as the core frame to maximise the strength of the body. The extrusions also work as T-Tracks so there are easy drill-free mounting points inside the body which are used to mount the shelving and other accessories - and the best part is you can adjust your shelving to the position you require without any modification!
Design Registration: 431576 - 431587
The Utemaster TrailCore Service Body is lightweight so you can take more gear with you without exceeding your payload. This has been achieved using the aluminium extrusion design which requires less material to achieve a strength rating that easily matches traditional Service Body designs.
Keeping your weight down is not only important for driver safety, but it also reduces fuel consumption and improves offroad dynamics.
Losing your tools and equipment due to a break-in is not only lost money - this can also have an impact on the time and productivity of the job you are working on.
The TrailCore Service Body features an upgraded locking system which is constructed using aluminium and is fully integrated with the body.
The handle is designed to disengage like a car door, meaning that there is no way for thieves to force the lock open.
Whether you're out on a dusty 4WD track or in the rain, a leak can damage tools or adventure gear.
This is not only costly, but it can also hinder your ability to get stuff done.
The TrailCore Service Body has minimal joints, no exposed rivets piercing the skin and full seals on all of the doors so your gear will be dry and free of dust.
The underfloor drawer is now inside the main body, so is not exposed to the elements.
If you'd like to see the TrailCore in person, use the link below to book an appointment. Someone from our team will be in touch to confirm.
Product Dimensions: TrailCore Service Body Dimensions: Download
Utemasters optional accessories that can be added to the TrailCore Service Body below:
LOGIN
0800 683 352
