Use the dropdowns below to select your vehicle.
You will then be able to see what's available for your vehicle model once you have.
Hit enter to search or ESC to close
Your cart summary
Compatible with the Centurion Canopy™ and Load-Lid™
Please Note: This unit can only be supplied as a twin unit with two drawers.
The Wellside Drawers are model specific, refer to the part number list at the bottom of the page.
Tired of tools sliding around in the back of the work ute?
The Utemaster Removable Wellside Drawers provide a secure, organised area to store your tool cases, small parts and equipment inside your wellside.
The Utemaster Drawers attach to the wellside using factory mounting points in the wellside, meaning you can easily fit and remove them without drilling through the floor.
Typically, wellside drawers are fitted to the vehicle using permanent mounting solutions.
The Utemaster Removable Wellside Drawers are designed using a quick-release system that bolts into the factory mounting points.
This means you can easily fit and remove them as required, making it the ultimate setup for work during the week and adventures on the weekend!
We understand that security is important to any tradie.
The cost and loss of productivity from stolen tools can be damaging.
The Utemaster Removable Wellside drawers are fully lockable with a supplied set of keys. To get into them you would need to, open the Load-Lid or Canopy, drop the tailgate then open the drawers.
This triple security layer is very robust and will help protect your valuable gear from being stolen.
A wellside drawer unit will take a beating over its lifetime.
They need to be strong and secure so they can withstand a hard day on the job site.
The Removable Drawers are constructed from steel, which gives it a high load rating and robust security. They are powder coated with the same durable black that is used on Load-Lids and Centurion Canopies.
The wellside drawers create a solid loading platform for carrying extra gear in your wellside.
It is important that the gear is in a fixed position so it does not roll around when driving.
There are mounting points around each side of the drawer unit top that can be used to strap down items and prevent them from sliding around.
The Utemaster Removable Wellside Drawers have a large opening of 950mm beyond the drawer shell.
The loadable area is large which is why the drawer has been designed to withstand 100kg per drawer and 200kg combined.
The Utemaster Centurion Canopy™ and Load-Lid™ are installed to a vehicle using no-drill-fit systems.
This means they can easily be fitted, then removed when required without any permanent damage.
The Removable Wellside Drawers have been designed with the same intent and complement the practicality of the Canopy and Load-Lid. Together it creates the ultimate wellside setup for getting work done, enjoying life's adventures!
If your Ute is parked on a downhill angle the drawer is designed to lock in place when fully extended.
This holds the drawer open and makes it easier to unload gear.
The Utemaster Removable Wellside Drawers are fixed using factory mounting points, this means you can fit them easily without needing to climb under the vehicle.
Click on your vehicle model below to download a copy of the fitting instructions.
Download - Ford Ranger 2022+
Download - Ford Ranger Wildtrak 2022+ (Factory Roller Cover must be removed)
Download - Ford Ranger 2011-2022
Download - Isuzu D-Max
Download - Mazda BT50
Download - Nissan Navara
Download - Toyota Hilux
Download - VW Amarok
Q) How much does a twin drawer unit weigh?
A) The weight of the whole drawer unit is approximately 120kg.
Q) Are the Wellside Drawers model-specific?
A) The brackets that hold the drawers in place are model specific because they are designed to fit the factory mounting points of that vehicle. Currently, we have drawers available for Ford Ranger 2022+, Ford Ranger Wildtrak 2022+, Ford Ranger, Isuzu D-Max, Mazda BT50, Nissan Navara Toyota Hilux, GWM Cannon, Mitsubishi Triton and VW Amarok.
Q) How far does the wellside drawer open?
A) The Utemaster Removable Wellside Drawers have a large opening of 950mm beyond the drawer shell.
Q) What is the load rating?
A) Each drawer is rated to 100kg.
|
To suit Ranger 2022+: Part #BLOK-PAIR-FRC2 |
|
To suit Ranger Wildtrak 2022+: Part #BLOK-PAIR-FRBC2-WT |
|
To suit Ranger 2011-2022: Part #BLOK-PAIR-FRB2 |
|
To suit Cannon: Part #BLOK-PAIR-GWMA32 |
|
To suit D-Max: Part #BLOK-PAIR-IDD12 |
|
To suit BT50: Part #BLOK-PAIR-MBC9 |
|
To suit Triton: Part #BLOK-PAIR-MTB7 |
|
To suit Navara: Part #BLOK-PAIR-NNC1 |
|
To suit Hilux: Part #BLOK-PAIR-THB4 |
|
To suit Amarok: Part #BLOK-PAIR-VWA3 |
LOGIN
0800 683 352